How to Troubleshoot Brother Printer Error Code 30?

How to Troubleshoot Brother Printer Error Code 30?

Brother printer is a widely used printing device in the market at present. It is known for the best printing services. It also provides the best printing, scanning, and fax services to its users. It is full fill with all the needs of people. But as we know, none of the electric devices is pronto technical glitches so that the people may face some common issues with this printing device. If you are facing Brother printer error code 30, so you can try to solve this problem by applying the given solutions. It is a very common problem that occurs when the print head carriage is failing to return to its home position to the far right of the unit. Sometimes the problem arises when both of the spring available at each side of the carriage is out of place. Today, we will discuss the complete process to solve Brother Laser printer error code 30. 

Through the help of given instructions, you can easily troubleshoot all the problems without any hassle. To get any other help, you can contact the experts at any time without any difficulty. The professional will give you one of the best solutions that will help to solve all the problems related to the Brother printing machine. 

Ways to remove Brother printer error 30

It is a common problem that generally occurs when the covers of the cartridge may not be locked properly in their place. To overcome this problem, you need to apply the best troubleshooting steps that help to solve this problem as soon as possible. To solve error code 30, we brought the best troubleshooting steps that are mentioned below:

Solution 1.

• To troubleshoot this error, you need to open the cover of the scanner by using the plastic tabs that are available on the left and right sides of the printer. 
• Then, it would be best if you shifted the print head to the middle. 
• After that, check and make sure that no piece of paper, staple, or the paper clip should be there.
• If you find the error again, then move to the next step to solve this error. 

Also Read: How to Resolve Brother Printer Error Code TS-05?

Solution 2.

• At first, you need to hold the scanner cover by using the plastic tabs of the cover that are placed on the left and right side of the printer until it locks carefully into the open position.
• After that, slide the print head over to the right side under the cover to make sure that you have clean all the strip of the encoder. Through a clean cloth, grab the encoder strip on both sides and scrub the cloth down the strip from one end to the other. 
• If the error comes again on the printing device, then you need to go to the next solutions. 

Solution 3.

• To solve this problem, you need to check the position of the encoder strip, whether it's fine or out of place. 
• Then, you need to open the printing device and reinsert the strip.
• Restart the printer and take a test print to check printing quality.

If the problem persists after applying the above-mentioned steps, then don’t take tension. Just pick up your phone and call on Brother Printer Support phone number +(1)-844-489-7268.